Help Center - Magcubic Hy300 Pro Portable Projector

Magcubic HY300Pro

Explore all products >>

Tutorial Videos
Specs
FAQs
Help

Tutorial Videos

Specs

Magcubic HY300Pro

Resolution
720P
Brightness
200 ANSI LM
Focus Mode
Manual
Keystone Correction
Vertical: Auto / Horizontal: Manual
Contrast Ratio
8000:1
Throw Ratio
0.8:1
BT/WIFI
BT 5.4/WiFi 6
Weight
0.53 kg

FAQs

All FAQs
Connectivity
Device Settings
System & Maintenance
Troubleshooting

How Do I Connect Bluetooth Device?

Go to Settings > Bluetooth Settings > Available devices

How Do I Zoom In/Out?

Go to Settings > Projection settings > Screen Zoom

How Do I Manually Adjust the Keystone.

Go to Settings > Projection settings > Keystone Correction

How Do I Adjust the Focus?

To get a clear picture, simply turn the focus wheel on the projector until the image is sharp.

What is Projector's Projection Distance?

The distance between the projector and the projection surface must be a minimum of 0.5 m and a maximum of 3m. This ensures a projection image between 40" and 130".

How Do I Upgrade the Firmware of Projector?

Go to Settings > About devices > Online upgrade

How Do I Get the System Version of the Projector?

Go to Settings >About devices > UI version

How Do I Factory Reset the Projector?

Go to Settings > Other Settings > Factory Reset Settings

What Should I Do If My Projector Has No Sound?

Try the following steps to see if they help: 1. Adjust Volume: Press the Volume Up/Down button on the remote control to make sure the volume isn’t muted or too low. 2. Connect to a Bluetooth Speaker: Go to Settings > Bluetooth Settings > Available Devices to connect your projector to an external Bluetooth speaker. 3. Check Video Format: If the video format includes Dolby sound, try playing a standard audio format to test if the issue is format-related. 4. Factory Reset: Perform a factory reset by navigating to Settings > Other Settings > Factory Reset to restore default audio settings. 5. Inspect Speaker Connection: If your projector has a built-in speaker, disassemble the device (with the projector powered off) to check if the speaker cable is securely connected. Note: Ensure the projector is turned off and unplugged while inspecting internal components to avoid any risk of injury.

What Should I Do If the Image is Tilted?

Try the following steps to see if they help: 1. Ensure the projector is properly aligned and that the lens is facing the screen directly. 2. Navigate to Settings > Projection settings > Keystone Correction > Initial angle correction. 3. If the above steps don’t resolve the issue, manually adjust the keystone correction by going to Settings > Projection settings > Keystone Correction > Turn Off Auto Keystone Correction > Manual Down keystonecorrection

What Should I Do If My App Crashes?

1. Try another Wi-Fi network and update the firmware. Go to Settings > About devices > Online upgrade 2. Check if your time zone is accurate via Settings > Date And Time Setting> Time Zone Selection 3. Clear data via Settings > My Apps > (App Name) > Clear Cache. 4. Reset the projector via Settings > Other Settings > Factory Reset Settings

What Should I Do if the Projector Can't Connect to Wi-Fi?

1. Place the projector and your router within 16 ft / 5 m of each other. Test if other devices can connect to Wi-Fi. 2. Check if your time zone is accurate via Settings > Date and time Setting 3. Try a different Wi-Fi network or connect to your phone's hotspot. 4. Try your router's 2.4GHz and 5GHz settings. 5. Reset the projector by going to Settings > Other Settings > Restore factory settings.

What Should I Do If My HDMI Has No Signal?

1. Adjust the HDMI output resolution and refresh rate of the connected device. 2. Press the OK button on the remote control to confirm whether you can enter the screen projection interface and then try connecting the HDMI cable and external devices. 3. Try disconnecting and connecting the HDMI cable or using a different HDMI cable to see if this resolves the issue. 4. Connect the projector to another device using the same HDMI cable to determine if the issue is with the projector or the device. 5. If the issue persists, disconnect the projector and connect the device to a TV via HDMI to determine if the issue is with the device or the projector.

What Should I Do If My Projector is Unable to Power On?

1. Check the Power Indicator: Ensure the power indicator light is on when the power cable is plugged in. 2. Try a Different Power Cable: Use another functional power cable to see if this resolves the issue. 3. Update the Firmware: If possible, update the projector to the latest firmware via USB drive.

What Should I Do If My Projector Doesn’t Project?

1. Power Indicator Blue, Light in Lens but No Picture: Check if the screen cable is loose and reconnect it. If this doesn’t resolve the issue, update the projector’s firmware to the latest version via USB drive. 2. Power Indicator Blue, Lens Dark, No Picture: Check if the lamp board is loose. Disconnect the lamp board cable, place a sponge over the connection point, and reconnect it. If this still doesn’t work, consider replacing the lamp board. 3. Power Indicator Blue, Lens Only Projects Faint Blue Light: First, check if the fan is rotating. If it is, open the projector to check if the screen cable is loose, and reconnect it if necessary. If this does not resolve the issue, update the projector’s firmware to the latest version via USB drive.

What Should I Do If My Projector Automatically Shuts Down?

1. Check for High Temperature Warnings: See if there’s a prompt indicating the projector has shut down due to high temperature. 2. Check the Fan Operation: Confirm whether the fan is running. If needed, open the projector and reconnect the fan cable. - If the fan is working, update the projector to the latest firmware via USB drive. - If the fan is not working, consider replacing it.

What Should I Do If the Remote Control Is Not Work?

1. Replace the Batteries: Insert new batteries, ensuring the positive and negative poles are correctly aligned. Reversed polarity will prevent the remote from working. 2. Use a Wired USB Mouse: Connect a wired USB mouse to control the projector as an alternative. 3. Contact Support: If the issue persists, reach out to support for a replacement remote control

What Should I Do If the Projected Image Has Lines or Is Flashing?

1. Restore Factory Settings: Go to Settings > Other Settings > Factory Reset to reset the projector to its original settings. 2. Update Firmware: Go to Settings > About Device > Online Upgrade to update the projector to the latest firmware version. 3. Check the Screen Cable: If the issue persists, carefully disassemble the device and gently move the screen cable. If the lines shift as the cable moves, the screen may be faulty and will likely need replacement.

What Should I Do If the Projected Image Appears Burnt?

1. Check Fan Operation: Confirm that the fan is working properly and that hot air is being discharged from the exhaust port. Ensure nothing is blocking the machine’s heat dissipation. 2. Re-plug or Replace the Fan: If the fan isn’t working, you may need to disassemble the projector to re-plug the fan cable or replace the fan. 3. Inspect the Screen: If the above steps don’t resolve the issue, the screen may be faulty and will likely need replacement.

What Should I Do If the Fan Noise is Loud?

The projector contains a cooling fan, which may produce some noise during operation. This is normal and is similar to other electronic devices like computers. We have measured the projector's noise level to be around 35 dB, which is the average calculated from measurements taken in various directions (up and down, left and right, front and back) at a distance of one meter. If you are experiencing unusually loud fan noise, consider the following: 1. Gently shake the machine to confirm that if any parts have fallen out from the inside 2. Please send us a short video demonstrating the problem? You can upload the video to a file-sharing service like WeTransfer or a similar platform. Once uploaded, kindly send us a screenshot or PDF containing the download link using the "Attach File(s)" feature in the Message Center.

Still Need Help?

Online Customer Service

help@magcubic.com

KOLs Connection Service

marketing@magcubic.com

B2B Partnerships

info@magcubic.com

Shopping Cart